Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Brakes/Levers/Pads

Campagnolo DB-310 Brake Pads
- More durable and quiet resin compound than previous DB-210 pads - Anti-vibration elastomer behind pad further reduces noise - Magnetic spring in caliper & physical spring between pads for fast and consistent pad return - Visual wear indicator shows if your pads need to be replaced, without removing them - Chamfering at the bottom eases wheel insertion, for race-fast wheel changes - Loops at top of the pads act as cooling fins for improved heat dissipation
Shimano E01S E-Type Pads
- Shimano, BR-M575, E01S, Metal disc brake pads, pair, E-type, Y8FL98010
Shimano G-Type Resin Pads
- Pair of G-Type disc brake pads without fins, for 1 caliper - Resin Compound - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin
Shimano L-Type Resin Pads
- Pair of L-Type brake pads with fins, for one caliper - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, -Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100
Bontrager Rubber Brake Cable Boot
$0.99
• Designed to keep dust and dirt out of V-Brake cable/housing systems
Hope 6mm Copper Seal Washer (Bag of 10)
$1.90
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Hope Copper Washer for 5mm or Stainless Line (Bag of 10)
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
Hope Brass Compression Olive
$2.39
Brass compression olive for Hope hydraulic disc brakes.
Hope X2 M4 V2 Mono Moto Pad Disc Brake Pads Clip
$2.40
Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes
Hayes Banjo Bolt
$2.88
Replacement banjo bolt for Hayes hydraulic Brake systems.
Hayes Bleed Kit Adapter
$2.88
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Sunlite X-Cut Brake Pads
$2.99
• Compatible with most side pull and center pull brakes • All weather compound
Hope Reservoir Cap Screw Brake Lever
$3.00
Replacement reservoir cap screw for Hope brakes.
Kool-Stop Thinline Brake Pad Hardware Kit
$3.69
- Low profile - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Knurl-lock washer system
Origin8 Disc Washer
$3.99
Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag
Sunlite Brake Pivot Bolt
$3.99
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front
TRP 6-Bolt Rotor Spacer
$3.99
Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.
Shimano 105 5800 Brake Cable Barrel Adjusting Unit
$4.00
- Replacement barrel adjuster for 105 5800 brakes
Hope Brass Hydraulic Hose Insert for Braided Hose
$4.28
Brass hose insert for Hope hydraulic disc brakes.
Hope Shroud for Black Brake Line
$4.48
Hope 5mm Standard Hose Kit with Fittings for Hope Brake
Jagwire Basics X-Caliper Brake Pads
$4.99
Our mountain rim brake pads are available both with a threaded or smooth post.
Origin8 Super Noodle for Linear Pull Brakes
$4.99
Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable. - Lightweight resin/alloy design
Sunlite Cantilever Shoe Eye Bolt
$4.99
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
Sunlite Z Brake Pads
$4.99
- Compatible with most side- and center-pull brakes - Excellent for BMX and freestyle - Hex nut type - All-weather compound
SRAM Master Cylinder/Lever Parts
$5.00
- Parts listed are for servicing and overhauling a single master cylinder/lever assembly
Giant Molded BMX Caliper Brake Pads-Threaded
$5.25
-Molded threaded BMX caliper brake pads
Giant Molded U-Brake Pads-Threaded
$5.25
-Molded threaded u-brake pads
Odyssey A Brake Shoes
$5.99
- Pad Attachment Style: Threaded Post - Rim Compatibility: Standard - Intended Brake Type: U-Brake - Pad Type: One Piece
Origin8 Boss Plugs
$5.99
Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike. - Fits into fork brake boss holes for V-brake to disc conversion
Sunlite Cantilever Boss
$5.99
- Standard replacement cantilever/v-brake bosses
Page 1 of 29 Next page