Filter By:
- Cameras (4)
- Parts & Accessories (83)
- Cyclo-Computers (22)
- GPS (14)
- Heart-Rate Monitors (11)
- Phone Accessories (13)
- Power Meters (3)
- Sports Watches (6)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Electronics

$3.99 - $5.99
Keep your computer and sensors ready for every ride with replacement batteries
Key features:
- CR2032 battery is used for most Trek and Bontrager computers
- 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor
- LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

$3.99
- Replacement parts and accessories for SpeedTrap Digital Speed Sensor
- Fork Cap covers SpeedTrap pocket when sensor is removed
- Spacer is required on some forks to position sensor closer to wheel magnet

$5.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705.
- Glass-filled nylon, stainless steel Torx T25 bolt
- Weight: 20g

$5.99
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights
- Also able to charge most other Micro USB systems
- 9 inches/23cm long

$7.99
Get your computer dialed with the perfect magnet
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
- Universal crank magnets sized for your bike and sensor
- Compatible with all cadence sensors

$7.99
Get your computer dialed with the perfect magnet
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
- Universal crank magnets sized for your bike and sensor
- Compatible with all cadence sensors

$7.99
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
Key features:
- Universal crank magnets work with any cadence sensor
- Get the perfectly sized magnet, sized right for your bike and sensor
- 20mm cadence magnet improves signal for wider gaps between crank and sensor

$7.99
Keep your device secure and close-at-hand on the water with this neoprene flotation lanyard, featuring a quick-release connector.

$9.00
Garmin's set of Bike Cadence Sensor Replacement Bands fasten your Bike Cadence Sensor (sold separately) to any size crank arm.

$9.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$9.99
Use the same quarter-turn mount you use for your Edge cycling device to secure your Varia UT 800. Simply attach the adapter to the quarter-turn to transition to a friction flange mount, securely attaching Varia UT 800 to your bicycle's stem or handlebars.

$9.99
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

$13.99
Look - no hands! Attach your handheld to this quick release lanyard and wear it around your neck so you can keep your hands free during your outdoor adventure.

$14.99 - $19.99
Blendr add-on to Kovee Pro 35 stems
Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases.
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory
- Bases for use with the Kovee Pro 35mm stem
- Add any accessory mount (sold separately) for an elegant, integrated look

$14.99
Garmin's Bicycle Mount Kit lets you attach any compatible Garmin to your bike's handlebars, so the data stays out in front where you can see it.

$14.99
Secure your Varia Vision in-sight display or Nautix in-view display to your eye wear with this mount. Package includes mount and elastic bands for easy installation.

$14.99
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

$14.99
The Quad Lock Universal Adapter is designed using a strong adhesive that adheres directly to the rear of most smartphones or cases, which then allows your smartphone to securely attach to any Quad Lock mount.
- Universal adapter adheres directly to phone or phone case (not included)
- Dual-stage lock keeps your phone secure over bumps and jumps
- Compatible with all Quad Lock mounts
- Does not include mount

$15.99
Where your gaze goes, your light follows
Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights.
- Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet
- Tested with an accelerometer for intended breakaway point if involved in a crash

$15.99
- Sliding closure helps keep sweat and precipitation away from valuables
- Large, clear, center window allows easy operation of touch screen
- Compatible with most smartphones
- 7.5"" (19cm) x 4.5"" (11cm) wide

$17.99
Quickly and easily swap your Bontrager or Trek cycling computers and wireless sensors between bicycles without tools with these silicone mounting straps. Large and small sizes ensure proper fit on most forks.
• Designed for Bontrager and Trek analog wireless computers
• Interchange analog wireless sensor installs and removes in seconds without tools
• Interchange sensor includes both L and S silicone mounting straps to fit most forks
• Batteries can be found in computer accessories

$17.99
Easily mount your computer in the fastest, most aero position possible with the Bontrager Speed Concept Mount.
• Computer mount for the 2014 Speed Concept
• Mounts to all mono extensions creating a faux bar for any standard handlebar-mount cycling computer

$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet.
- Tested with an accelerometer for intended breakaway point if involved in a crash

$19.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet
- Tested with an accelerometer for intended breakaway point if involved in a crash

$19.99
Light up the road
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
- Blendr is an elegant, integrated accessory mounting solution
- Clip can be rotated for compatibility with many Bontrager accessories
- Works with any Blendr-compatible stem and the accompanying base

$19.99
Easily mount a cell phone and case directly to your bars for safe convenient access with the Insta-Mount and keep all of your favorite cycling and fitness apps safely accessible.
• Mount your hard-shell smart phone case to your bike
• Allows for easy access of phone on stem or handlebar
• Includes Insta-Mount, universal mount, and application grid
• Blendr-compatible
Page 1 of 5
Next page