Skip to main content

Cycliq FLY6 HD Camera + Rear Light

Cycliq FLY6 HD Camera + Rear Light
Please select options


The Fly6 rear facing bike camera and 100 lumen
light is engineered for peace of mind on the road
and a run time that lasts as long as you do.

Technical specs
Fly6 CE

Bike camera resolution: 1080p Full HD video at 60 fps or 30fps (1920×1080 16:9), 720p video at 60fps (1280×720 16:9)
EIS: 6-axis Electronic Image Stabilisation
Viewing angle: 135° wide angle
Recording structure: Looping video recording
Segment size: 550MB – 1.2GB (5 min segment at 1080p 60fps)
Video format: MP4

Max brightness: 100 Lumen
Light modes: Constant, flash, pulse
Brightness setting: Low, medium, high

Output: 5 volume levels for alerts
Microphone: Stereo recording
Alerts: When turning your device on or off, an audible battery status will sound, alerting you to the current battery level.
A recording alert notification can be set which provides a confirmation chime at 3, 5, and 10-minute intervals to notify you that your device is still recording video footage.

Size and weight
Height: 8.4cm/3.3in
Width: 3.5cm/1.4in
Depth: 4.4cm/1.7in
Weight: 110g/3.88oz

MicroSD cards
Max microSD card size: 32GB
Type: Class 10 microSDHC
Supported SD cards: See the full list of recommended microSD cards.

Type: Rechargeable lithium-ion battery (built-in)
Size: 3200mAh
Watt hours: 11.84wh
Voltage: 3.7v
Charge port: USB-C fast charge accepting up to 2.1 amps.
Charge your Fly6 CE using a USB wall charger (not supplied) or a USB port on your computer.

Water and dust resistant
Ingress protection: IP56
Nanotechnology: We’ve used nanotechnology on the inside and outside of your Fly6 CE to protect it from the
elements. This process modifies the entire surface area of the circuitry at a molecular level, permanently leaving your
device in a hydrophobic state. This should greatly enhance the longevity of your Fly6 CE device


Cycliq 1/8th turn quick release
Strap pack provided to mount the unit to your seat post (also fits aero seat posts)


Temp. range
Operating temperature: 0-45°C (32–113°F)
Storage temperature: 0-45°C (32–113°F)

In the box
1 x Fly6 CE
1 x Seat post mount
1 x Standard seat post strap
1 x Aero seat post strap
1 x 0° Spacer
1 x 7.5° Spacer
1 x Narrow aero adaptor
1 x Wide aero adaptor
1 x Quick start guide
1 x Safety information and warranty sheet
1 x USB to USB-C cable
1 x Safety tether

Control your device using Bluetooth and our Cycliq mobile app or your Garmin bike computer using ANT+.

If you’re involved in an incident, the Fly automatically locks the footages so it can’t be overwritten.

HD camera with 135° wide angle coverage at up to 60 frames per second with 6-axis image stabilisation.

Never run out of space on your SD card, the oldest footage automatically gets overwritten.

Snap on and off in seconds with a 1/8 turn quick release custom mount for aero or standard seat posts.

Need to grab a coffee? Connect to the app and an alarm will sound if someone moves your ride.

With 100 Lumens you’ll be seen day or night, and there are multiple modes to increase your visibility.

You’ll get up to 7 hours in camera only mode, and 4-5 hours with the lights on.

If the battery runs low, HomeSafe mode kicks in to keep the lights on for up to 30 minutes.

Shoot rock solid footage no matter what the conditions with
6-axis electronic image stabilisation.

Water resistant with a
nanotech coating to keep out
the dust, dirt and destruction.

Part Numbers

CE601 FLY6-CE601